Tyre Safety And Maintenance 101

Charlie Adey
in business
Tyre Safety And Maintenance 101

When on the road, the moving parts that suffer the most damage and are at maximum risk are your tyres. Thus, you must ensure that your tyres are safe enough to be on the road. If the tyres are not in good condition, you may lose control of the vehicle when driving at high speed.

It is effortless to maintain your tyres and perform regular check-ups. Properly maintained tyres last longer and give you better control of the road. Here is a guide on tyre safety and maintenance.

Maintain the Optimum Pressure
The tyres' recommended air pressure is mentioned in the car manual or on the door on the driver side. You can check the current tension with the help of a gauge. Just adjust the screw of the gauge over the tyre valve and check the readings. If the readings are below the optimum level, it’s time to get your tyres inflated.

If you plan to be on the road for a long time, it is recommended that you use Nitrogen in your Maxxis tyres, Coventry. Nitrogen is a relatively colder air, which implies the tyre's air won’t expand, thereby exerting pressure on the walls.

Keep an Eye on the Treads
Treads are the tyres' carvings that serve as grip on the road, keeping the vehicle stable on slippery roads. The easiest way to assess the treads is to see if they are visible or not.

Another way is to take a millimetre scale, put it in the treads across the tyre and note the readings. If the readings don’t match with the recommended level, it’s time to replace your tyres.

Look for Irregularities
Take a look of each tyre closely and notice if there’s any bulge, crack, puncture, or an object stuck in it. If any of your tyres were repaired recently for a puncture, check if the seal is holding up. However, it is advised that if you notice any of these irregularities, drive to the nearest garage and have your tyres repaired.

If you see a sharp object like a nail or a piece of glass stuck in the tyre, do not remove it. Instead, have it repaired by an expert.

Get Your Tyres Rotated
Tyre rotation means switching the position of every tyre to regulate the weight load. It is advised to rotate them once a year or after every 30,000 Km. The tyre under the driver seat is the most exposed because it carries weight all the time, so, you must switch its position.

This will ensure your car tyres' longevity, and no one of it will wear out sooner than the others.

Wheel Balancing and Alignment is Crucial
Balancing makes sure that no single tyre is carrying more car weight than others. If the weight is unevenly distributed, there is a higher chance of the tyres bursting out which poses a severe safety threat on the passengers. Therefore, make sure that you drive your car to the garage every three months to get your wheels balanced.

When the car is always on the road, the axle loosens up, and the wheels lose their alignment. When this happens, you might feel a bit of a steering issue. Therefore, you must restore the car tyres Coventry to their original position.

Do not Use a Different Set of Tyres
If one of your tyres is seriously damaged and you want to replace it, it is advised that you replace all the other tyres. This might be costly, but it ensures the safety of your vehicle in the long run. This will also help in the tyre rotation because all of them will be of the same age.

Spare Tyre Can’t be Overlooked
When you put a spare tyre in the trunk, make sure that it doesn’t come in contact with any substance that might damage the rubber. Also, always maintain the optimum pressure in that tyre too.


Also read about:
Top 5 Jeep Wranglers to go for in UAE
Three Quick Ways to Choose Good Assignment Writing Service in UK
Best Things To Do In Vicenza
Charlie Adey
Written By

Charlie Adey

Content Curator
Hi, I am a guest post writer and I believe in unique and quality content. Thanks to LetMePost for providing me author account of this awesome website